Tables

It attaches to our 5' and 8' instructor desks. Crafted from solid oak, oak and hardwood veneers (same as the instructor's desk). It is finished with a chemical resistant, earth-friendly UV finish. The side desk features one 13-1/2"W x 18"D x 10-1/4"H file drawer, two 13-1/2"W x 18"D x 4"H storage drawers and one 19-1/2"W x 18"D x 3"H pencil drawer. All drawers come with locks. The unit includes a 14-1/2"W x 20"D pull-out writing board. The classroom side of the unit features a bookshelf with one fixed shelf. The unit can be attached to either the right or left side of the instructor desk.

We've put fun into drawing with our light table! This table is constructed of a maple hard wood frame and a plastic laminate almond colored top. The shatter-resistant glass inset gives maximum diffusion of light with minimum glare and no hot spots. The top adjusts from 0-30 degrees and is equipped with a soft-close feature and a pencil stop. Easy to plug in (installed 120 volt electrical cord). Four energy efficient fluorescent tubes are included. Top size: 39-3/4"H x 44"W x 24"D

Perfect table for STEAM projects. We’ve taken our popular oak and maple science tables and enhanced them by adding a riser. The table features solid oak or maple (your choice) aprons and riser supports finished with a chemical resistant finish. The riser has 10" clearance above the work surface and is 12"D and made of the same material as the top you choose. Top options include: plastic laminate, chemical resistant laminate, phenolic resin and epoxy resin. All 72"W tables include leg braces and a stretcher for added strength. Tables stand 30"H. The top of the riser is 41" from the floor.

Perfect for the physically impaired or for classroom demos. Constructed of solid oak, hardwood and oak veneers with a chemical resistant, earth-friendly UV finish. The 1-1/4" ChemGuard top is supplied with or without a stainless steel look sink, toggle switch water pump, two 2-1/2 gallon supply and waste containers, GFI AC duplex receptacle with inlet socket, 25' extension cord, two rod sockets, two each 3/4" diameter x 36" long upright rods, 1/2" x 40" crossbar and two rod clamps. With a mobile capacity of 500 lbs. it rolls easily on 4" ball-bearing swivel casters with brakes. Dovetailed drawers are constructed of plywood and ride on epoxy coated glides. Cupboard door and drawers have locks. Wheelchair accessible from two sides, measures 32"W x 29"H. Inside drawers measure: 14.5"W x 19"D x 6"H. Dimensions: 72"L x 24"D x 33"H. Weight: 240 lbs.

This table has everything you could want. It adjusts easily from 27-3/4" to 39"H (42" with included spacer) in 2 cm increments in less than 30 seconds without the use of tools. Its apron is solid maple or oak and finished with a chemical resistant finish. It has a riser that provides extra workspace for each person to put his or her tools or laptop. The table has three top options: plastic laminate, chemical resistant laminate and phenolic resin. The riser’s horizontal surface matches your choice of top surface. The 12"D riser is supported by six 1" diameter powder coated steel tubes. The riser is 10" above the table surface. Tabletop measures 30"D x 60"W.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

This table has everything you could want. It adjusts easily from 27-3/4" to 39"H (42" with included spacer) in 2 cm increments in less than 30 seconds without the use of tools. Its apron is solid maple or oak and finished with a chemical resistant finish. It has a riser that provides extra workspace for each person to put his or her tools or laptop. The table has three top options: plastic laminate, chemical resistant laminate and phenolic resin. The riser’s horizontal surface matches your choice of top surface. The 12"D riser is supported by six 1" diameter powder coated steel tubes. The riser is 10" above the table surface. Tabletop measures 30"D x 60"W.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

High quality stainless steel sinks for your toughest cleaning tasks. Whether you need a drain board model or a stainless steel utility/prep basin, we have the right model for you. These one, two and three compartment sinks are perfect for washing, rinsing, and sanitizing. The 1-1/2" rounded front and side edges help contain splashes. The 18 gauge T-304 Stainless Steel is NSF certified and boosts optimum strength and durability. These sinks are safe for food prep. Stainless sinks all come with 1-5/8" galvanized legs with 1" adjustable high impact corrosion resistant feet, accommodate 8" on center faucets and have a 9” back splash. Select models come with 1/4" pitched drain boards to ensure proper drainage. Each sink has a 3-1/2" drain included. 36"H at sink front, 43-3/4"H at top of back splash. Uses fixture #250784. NSF approved.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.