Base consists of sturdy heavy gauge steel legs with stringers. Available in black or gray and with or without vises. Choose between two-station and four-station units. Top is constructed of 2-1/4" maple. Two-station measures: 64"W x 28"D x 32-1/4"H. Four-station measures: 64"W x 54"D x 32-1/4"H.
Constructed of heavy Gauge steel members which can be combined in a number of ways using any one of 3 tops, lower shelf, back and end stops. A wide variety of sizes is possible. Legs are welded construction with floor feet and include a three quarter deep lower shelf and rear stringer. Color: gray. Choice of three tops include: 1) 12 gauge steel top wrapped over 2" thick core, 2) 1-3/4" Maple top, 3) 2-1/4" Maple top. Height varies with top selected.
This workbench has a large work surface and plenty of open storage space on the maple plywood lower shelf. The base is constructed of solid 2-1/4" maple legs and frame. The top is 2-1/4" thick maple; 2-person (28"x64" top); 4-person (54"x64"). Can be ordered with or without black vises. Vises will need to be installed on site. The unit height is 31-1/4".
Designed for use against the wall, this series of workbenches provides the durability of hard maple tops with the functionality of open shelves. Constructed of solid maple legs, a plywood shelf with a back curb and 2-1/4" solid maple top. The 24" deep wall unit comes with an angle iron front edge and a 4" rear maple curb. The unit is finished with an earth-friendly UV finish. Available in four lengths and two heights.
Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)
Single faced unit has two doors and drawers. The locking drawers are fully dovetailed and roll easily on epoxy coated glides. The locking doors have pulls and are hung on five knuckle institutional hinges. The base of the unit is constructed of solid maple and maple veneers. The 2-1/4" thick top is hard maple. The unit is finished with an earth-friendly UV finish. Unit can be ordered with or without vises. Overall size: 64"W x 28"D x 31-1/4"H.
The Intermix Workstation fosters collaboration and encourages productivity! Created of solid maple veneers and finished with a chemical resistant, earth-friendly UV finish. These mobile units come with 4" locking casters for ease of use. All units have a 60" high-pressure laminate top, available in a variety of color options. The Open Tote model have two boxes on each side for storage of larger items, and a long open compartment measuring 4-1/2"H. that can be used to store rods, tubes, etc. It also includes eight small and one large clear Certwood totes. Small totes: (12 1/4"W x 16 3/4"D x 3"H), Larger Totes: (12 1/4"W x 16 3/4"L x 6"H). 36" high.
Designed for use against the wall, this series of workbenches provides the durability of hard maple tops with the functionality of open shelves. Constructed of solid maple legs, a plywood shelf with a back curb and 2-1/4" solid maple top. The 24" deep wall unit comes with an angle iron front edge and a 4" rear maple curb. The unit is finished with an earth-friendly UV finish. Available in four lengths and two heights.
Solid maple legs and stringers combined with maple plywood shelves combine to make the perfect wood bench for any shop. Customize this wood bench to meet your needs by choosing between four lengths (48", 60", 72", 96"), three depths (24", 30", 36") and two tops (1-3/4" thick and 2-1/4" thick maple). The 1-3/4" top unit is 30-3/4"H and the 2-1/4" top unit is 31-1/4"H.
Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)
Base consists of a single-faced heavy gauge steel unit, welded and riveted throughout. The unit provides two door units. Unit has double swing doors with cylinder lock mounted in a chrome handle with two point locking device and one adjustable shelf. Top is constructed of 2-1/4" maple. Available with or without vises. Available in either gray or black base unit. Overall size: 64"W x 28"D x 33-1/4"H.
Base consists of a single-faced heavy gauge steel unit, welded and riveted throughout. The unit provides two door units. Unit has double swing doors with cylinder lock mounted in a chrome handle with two point locking device and one adjustable shelf. Top is constructed of 2-1/4" maple. Available with or without vises. Available in either gray or black base unit. Overall size: 64"W x 28"D x 33-1/4"H.
Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)
Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)
Solid maple legs and stringers combined with maple plywood shelves combine to make the perfect wood bench for any shop. Customize this wood bench to meet your needs by choosing between four lengths (48", 60", 72", 96"), three depths (24", 30", 36")  and two tops (1-3/4" thick and 2-1/4" thick maple).  The 1-3/4" top unit is 30-3/4"H and the 2-1/4" top  unit is 31-1/4"H.