Science Labs

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

Store backpacks, coats and totes in these sturdy wood lockers. The backpack units are available in oak or maple veneer and contains one section. Each section contains two smaller cubbies and a larger backpack cubby. The locker section has a double hook mounted for hanging jackets and backpacks. The sections are divided with 3/4" veneered plywood and finished with a hard, UV finish. The back is designed to be anchored to a wall for stability. Black rubber base molding gives the locker unit a finished look.

This amazing sandbox uses 3D visualization applications and a hands-on exhibit combining a real sandbox, virtual topography and water created using a closed loop of a Microsoft Kinect 3D camera, powerful simulation and a Linux computer and data projector. The resulting (AR) sandbox allows users to create topography models by shaping real sand, which is then augmented in real time by an elevation color map, topographic contour lines, and simulated water and lava. The system teaches geographic, geologic, and hydro-logic concepts such as how to read a topography map, the meaning of contour lines, watersheds, catchment areas, levees, and much more. It can be used to teach history and explain complex geopolitical concepts as well as use for special needs children. The software was designed by a team of scientists at UC-Davis.* The sandbox comes complete with the box, camera, projector, wire management, and laptop with instructions to load the visualization software. The sandbox is made of solid oak and oak plywood and moves on heavy-duty locking casters. A wire management system keeps the cords from interfering with box. There is a handy shelf to hold the laptop while in use, which folds away with a collapsible hinge. Note: Sand not included (we recommend 250 lbs of Sandastik® sparkling white play sand). Detailed instructions for downloading and calibrating the software and running the program are included. * The Augmented Reality Sandbox was developed by the UC Davis W.M. Keck Center for Active Visualization in the Earth Sciences (KeckCAVES, http://www.keckcaves.org), supported by the National Science Foundation under Grant No. DRL 1114663. For more information, please visit http://arsandbox.org.

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/2” ShopTop®, Overall Size: 96"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/4" Black Plastic Laminate, Overall Size: 96"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/4" Almond Plastic Laminate, Overall Size: 96"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-3/4" Maple, Overall Dimensions: 96"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/2” ShopTop®, Overall Size: 72"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/4" Black Plastic Laminate, Overall Size: 72"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/4" Almond Plastic Laminate, Overall Size: 72"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-3/4" Maple, Overall Dimensions: 72"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/2” ShopTop®, Overall Size: 60"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/4" Black Plastic Laminate, Overall Size: 60"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-1/4" Almond Plastic Laminate, Overall Size: 60"W x 30"D x 25.5"- 35.5"H

Flexibility is the key component of this workbench. The bench is perfect for Makerspaces and Fab-Labs. It can be adjusted in height from 25-1/2”H to 35-1/2”H. Add an additional 4” to the height by adding the optional 4” locking casters. The legs and frame are made of 18 gauge steel. The steel base is finished with a gray baked enamel finish. The static weight capacity is 1500 lbs. without casters and 1200 lbs. with casters added, proving just what a work horse this bench is! Top Surface: 1-3/4" Maple, Overall Dimensions: 60"W x 30"D x 25.5"- 35.5"H