Science Labs

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

The A7000 table has the same construction as our standard table with the exception of adjustable legs. The aprons are solid oak or maple (your choice). Legs can adjust from sitting height of 30" to standing height of 36" by removing the bolt on the leg surface. Available in four types of tops: epoxy, phenolic resin, plastic laminate, and ChemGuard. The table is finished with a chemical resistant finish.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

This mobile robotics storage cabinet offers storage for six competition size robots. This maple plywood storage cabinet provides six separate storage compartments. Each of the six compartments has a fixed shelf which holds up to an 18” square robot. The solid doors are outfitted with a secure 3 point locking handle. This cabinet is constructed with a 1” thick bottom for security and durability. The mobile robotics storage cabinet moves easily on 4” heavy-duty locking casters.

Lets all the students record data right on the table top. These STEM tables are built similar to our oak and maple plain apron tables, but with an easy-to-use imprinted top. The top is imprinted with graphs and measurement tools so students can measure and record shared data. The dry erase top has a compass, meter stick, yard stick, circular graph and data recording graph (imprint images are nominally correct – the measurements may not be exactly as shown). This hi-pressure laminate top works as a standard marker board, can be marked up with crayons, grease pencil or dry erase markers. Clean up is easy with standard markerboard cleaner or a damp cloth. The 54"W x 24"D top is perfect for two to four students to collaborate. Table apron and legs are solid maple.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Conveniently store and organize your daily essentials with clear tote storage that includes twelve smaller totes (12-1/4"W x 16-3/4"D x 3"H) and three larger totes (12-1/4"W x 16-3/4"D x 6"H) for flexible storage. The clear sturdy glide and tilt tote tray runners prevent the totes from falling out. This cabinet also comes equipped with a wood 39"W x 20"D x 4"H pullout drawer to store larger items. It’s constructed of solid oak hardwoods with a chemical resistant, earth-friendly UV finish, and rolls easily on heavy-duty, locking casters. Top surface: black plastic laminate. Overall dimensions 44"W x 24"D x 40"H

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

This table has everything you could want. It adjusts easily from 27-3/4" to 39"H (42" with included spacer) in 2 cm increments in less than 30 seconds without the use of tools. Its apron is solid maple or oak and finished with a chemical resistant finish. It has a riser that provides extra workspace for each person to put his or her tools or laptop. The table has three top options: plastic laminate, chemical resistant laminate and phenolic resin. The riser’s horizontal surface matches your choice of top surface. The 12"D riser is supported by six 1" diameter powder coated steel tubes. The riser is 10" above the table surface. Tabletop measures 30"D x 60"W.

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls.  The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls.  The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls.  The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls.  The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

Display your models with this torso cabinet that includes a pull-out shelf for a torso plus one fixed and three adjustable shelves for your other models. Oak veneer cabinet with a tempered glass door framed by solid oak. The door has institutional hinges and 3-point locking handles. In addition the cabinet is finished with a safe UV chemical resistant finish and rubber base molding.

The Corrosive Chemical Storage Cabinet is the solution for storing non-flammable acids and corrosive liquids. This storage cabinet is constructed of 3/4" thick exterior grade plywood with a finished top and lined with a 1/4" polypropylene interior. Included is a removable back panel to access the venting behind the cabinet, 2" plastic containment drip pan, (1) lined adjustable shelf and 96mm pulls. This unit is available in either two doors or single door and is finished in Northwood’s UV finish.

The Corrosive Chemical Storage Cabinet is the solution for storing non-flammable acids and corrosive liquids. This storage cabinet is constructed of 3/4" thick exterior grade plywood with a finished top and lined with a 1/4" polypropylene interior. Included is a removable back panel to access the venting behind the cabinet, 2" plastic containment drip pan, (1) lined adjustable shelf and 96mm pulls. This unit is available in either two doors or single door and is finished in Northwood’s UV finish.

This table has everything you could want. It adjusts easily from 27-3/4" to 39"H (42" with included spacer) in 2 cm increments in less than 30 seconds without the use of tools. Its apron is solid maple or oak and finished with a chemical resistant finish. It has a riser that provides extra workspace for each person to put his or her tools or laptop. The table has three top options: plastic laminate, chemical resistant laminate and phenolic resin. The riser’s horizontal surface matches your choice of top surface. The 12"D riser is supported by six 1" diameter powder coated steel tubes. The riser is 10" above the table surface. Tabletop measures 30"D x 60"W.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

This attractive instructor's desk is made of solid maple construction with a 3/4" almond colored plastic laminate top. The apron has two storage drawers; one for prints and a second for tools. Both drawers lock. The top adjusts from 0-30 degrees, has a pencil strip and has a soft close feature. The desk is available in two widths (60"W and 72"W) and is 37-1/2"D and 36"H. Ships partially assembled.