Science Labs

Fully adjustable two-station art/drafting/ graphics table is designed with two (24" x 30") adjustable tops, and also includes a stationary flat surface across the back to set a flat panel computer monitor. Both sides of the adjustable plastic laminate tops include a pencil stop. Accommodates both elementary and high school students. The powder-coated legs adjust in 2 cm increments in seconds without the use of tools. Height adjusts from 27-3/4"-39"H (42" with included spacer). Overall size is 60"W x 30"D.

Designed by taking our most popular work station and making it into a mobile table. This new table provides flexibility in the classroom by reconfiguring your space! Legs and aprons are constructed of maple veneer and is 13/16”D x 4-1/2”H with heavy-duty, 13 gauge steel corner braces, 2-1/4” square legs with 5/16” hanger bolts installed, are attached to apron with nuts and washers supplied. The Forward Vision tables are equipped with locking casters. Top Surface: 3/4” Phenolic, Overall size: 84" X 44" X 36"

This new microscope storage cabinet is perfect for storing large microscopes. It is constructed of solid oak and oak veneers with a chemical resistant, earth-friendly UV finish. This cabinet holds up to fifteen, 9"W x 15"D x 16- 1/2"H microscopes. Secure, locking oversized doors for easy accessibility. It also contains adjustable wire dividers to create a flexible storage solution for any size microscope. This cabinet rolls on heavy-duty 4" casters with brakes. 

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Book Compartment Tables are built with the same quality techniques as the plain apron table. They are finished with a chemical resistant, earth-friendly UV finish. These tables have either two or four book compartments (depending on size) installed in the apron. The book compartments measure 14" W x 13-5/8"D x 3-7/8"H. The table has a weight capacity of 500 lbs. On tables 72"W or over, we recommend ordering with leg braces and stretchers. (Shipped KD with tops attached)

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Perfect table for STEAM projects. We’ve taken our popular oak and maple science tables and enhanced them by adding a riser. The table features solid oak or maple (your choice) aprons and riser supports finished with a chemical resistant finish. The riser has 10" clearance above the work surface and is 12"D and made of the same material as the top you choose. Top options include: plastic laminate, chemical resistant laminate, phenolic resin and epoxy resin. All 72"W tables include leg braces and a stretcher for added strength. Tables stand 30"H. The top of the riser is 41" from the floor.

Designed by taking our most popular work station and making it into a mobile table. This new table provides flexibility in the classroom by reconfiguring your space! Legs and aprons are constructed of maple veneer and is 13/16”D x 4-1/2”H with heavy-duty, 13 gauge steel corner braces, 2-1/4” square legs with 5/16” hanger bolts installed, are attached to apron with nuts and washers supplied. The Forward Vision tables are equipped with locking casters. Top Surface: 3/4” Phenolic, Overall size: 84" X 44" X 36"

Need to move a lot of items at once? This sturdy storage cabinet with 1" bottom can help. It has two fixed and two adjustable shelves, which are concealed behind two locking doors with 3-point handle. The unit moves easily on 4" locking, swivel casters.

Perfect table for STEAM projects. We’ve taken our popular oak and maple science tables and enhanced them by adding a riser. The table features solid oak or maple (your choice) aprons and riser supports finished with a chemical resistant finish. The riser has 10" clearance above the work surface and is 12"D and made of the same material as the top you choose. Top options include: plastic laminate, chemical resistant laminate, phenolic resin and epoxy resin. All 72"W tables include leg braces and a stretcher for added strength. Tables stand 30"H. The top of the riser is 41" from the floor.

The drawing table system lets you choose from 11 table options. Besides the plain model the options include: six drawers, board storage for six, and combination six drawer with board storage. The deluxe model also includes a CPU holder, a monitor arm, keyboard tray, and mouse tray. All units are constructed of solid maple framing and reinforced with 13-gauge steel corner braces. Your choice of a one- or two-piece top made of 3/4" almond colored plastic laminate and equipped with a soft-close feature and a pencil stop. The top adjusts from 0 to 30 degrees. On the one-piece top models, the fully adjustable top measures 42"W x 30." On the two-piece top, the 30" x 30" left side of the top can be fully adjusted and is equipped with a soft-close feature and a pencil stop with a 12"W x 30"D flat top on the right side of the unit. CPU holder dimensions are 23"H x 11" W x 29"D (all adjustable). All the doors and drawers lock, and the drawers are completely finished and dovetailed on all four sides. The board storage models has six (25-1/4"H x 24-3/8"D x 1-1/4"W) spaces for drawing boards. Overall size:42"W x 30"D x 39-3/4"H.

Designed by taking our most popular work station and making it into a mobile table. This new table provides flexibility in the classroom by reconfiguring your space! Legs and aprons are constructed of maple veneer and is 13/16”D x 4-1/2”H with heavy-duty, 13 gauge steel corner braces, 2-1/4” square legs with 5/16” hanger bolts installed, are attached to apron with nuts and washers supplied. The Forward Vision tables are equipped with locking casters. Top Surface: 3/4” Phenolic, Overall size: 84" X 44" X 36"

Fully adjustable two-station art/drafting/graphics table able to accommodate both elementary children through adults. This table comes with two (30" x 30") adjustable plastic laminate tops—one or both sides of the table can remain flat or at an angle. Both sides of the top include a pencil stop. The unique design of the leg allows you to adjust the height of the table in less than 30 seconds without the use of tools. The table adjusts from 27-3/4"-39"H (42" with included spacer) in 2 cm increments. Pencil stop included on hinge side of top. Overall size is 60"W x 30"D.

Book Compartment Tables are built with the same quality techniques as the plain apron table. They are finished with a chemical resistant, earth-friendly UV finish. These tables have either two or four book compartments (depending on size) installed in the apron. The book compartments measure 14" W x 13-5/8"D x 3-7/8"H. The table has a weight capacity of 500 lbs. On tables 72"W or over, we recommend ordering with leg braces and stretchers. (Shipped KD with tops attached)

A mobile demonstration center with GFI protected AC duplex electrical receptacle, 25' extension cord and rod sockets. The unit includes four drawers which are dovetailed and mounted on epoxy coated glides. Sliding doors with a lock conceal the four drawers and storage compartment for large equipment. Unit has a 1-1/4" ChemGuard top and rolls easily on 4" swivel casters with brakes.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Designed by taking our most popular work station and making it into a mobile table. This new table provides flexibility in the classroom by reconfiguring your space! Legs and aprons are constructed of maple veneer and is 13/16”D x 4-1/2”H with heavy-duty, 13 gauge steel corner braces, 2-1/4” square legs with 5/16” hanger bolts installed, are attached to apron with nuts and washers supplied. The Forward Vision tables are equipped with locking casters. Top Surface: 3/4” Phenolic, Overall size: 84" X 44" X 36"

Designed by taking our most popular work station and making it into a mobile table. This new table provides flexibility in the classroom by reconfiguring your space! Legs and aprons are constructed of maple veneer and is 13/16”D x 4-1/2”H with heavy-duty, 13 gauge steel corner braces, 2-1/4” square legs with 5/16” hanger bolts installed, are attached to apron with nuts and washers supplied. The Forward Vision tables are equipped with locking casters. Top Surface: 3/4” Phenolic, Overall size: 84" X 44" X 36"

Book Compartment Tables are built with the same quality techniques as the plain apron table. They are finished with a chemical resistant, earth-friendly UV finish. These tables have either two or four book compartments (depending on size) installed in the apron. The book compartments measure 14" W x 13-5/8"D x 3-7/8"H. The table has a weight capacity of 500 lbs. On tables 72"W or over, we recommend ordering with leg braces and stretchers. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Conveniently store and organize your daily essentials with clear tote storage that includes twelve smaller totes (12-1/4"W x 16-3/4"D x 3"H) and three larger totes (12-1/4"W x 16-3/4"D x 6"H) for flexible storage. The clear sturdy glide and tilt tote tray runners prevent the totes from falling out. This cabinet also comes equipped with a wood 39"W x 20"D x 4"H pullout drawer to store larger items. It’s constructed of solid maple hardwoods with a chemical resistant, earth-friendly UV finish, and rolls easily on heavy-duty, locking casters. Top surface: black plastic laminate. Overall dimensions 44"W x 24"D x 40"H