Science Labs

Science Labs

Sort by
Display per page

SIDE DESK

1146K
It attaches to our 5' and 8' instructor desks. Crafted from solid oak, oak and hardwood veneers (same as the instructor's desk). It is finished with a chemical resistant, earth-friendly UV finish. The side desk features one 13-1/2"W x 18"D x 10-1/4"H file drawer, two 13-1/2"W x 18"D x 4"H storage drawers and one 19-1/2"W x 18"D x 3"H pencil drawer. All drawers come with locks. The unit includes a 14-1/2"W x 20"D pull-out writing board. The classroom side of the unit features a bookshelf with one fixed shelf. The unit can be attached to either the right or left side of the instructor desk.
$2,869.00

TABLE,COMP,1 EPXY TOP,42X72

C7406K30L
Book Compartment Tables are built with the same quality techniques as the plain apron table. They are finished with a chemical resistant, earth-friendly UV finish. These tables have either two or four book compartments (depending on size) installed in the apron. The book compartments measure 14" W x 13-5/8"D x 3-7/8"H. The table has a weight capacity of 500 lbs. On tables 72"W or over, we recommend ordering with leg braces and stretchers. (Shipped KD with tops attached)
$2,873.00

EYE SAFETY CABINET - LAB

ESC11-11LM
The Monitor UV Germicidal storage cabinet measures 24-1/2"W x 32"H x 9-1/2"D. Weighs 45 pounds. The cabinet holds 6 glasses or 5 goggles to a shelf on 8 shelves. With an average kill rate of 99.2%, the monitor provides excellent protection in 5 minutes. Shuts off automatically if the double doors are opened. Cabinet is constructed of 24 gauge white enameled steel. Pilot light confirms that the UV lamp is in use. Five minute cycle is controlled by a timer and doors are interlocked with tamper resistant latches. Germicidal lamp has a 20 year limited warranty. No assembly required. Lockable, two keys provided. Wall or shelf mountable with a 7' grounded electrical cord. Underwriters Laboratories Inc. Listed: File #E140818. No direct UV radiation escapes from cabinet when in use. Glasses or goggles not included.
$2,884.00

MOBILE LAB 48.00X28.00X36

4332KF
This mobile unit is equipped with two storage compartments. The three drawers (one file, two box) have dovetail joints and run smoothly on epoxy coated steel glides. Includes a pull-out writing board, locks for drawers and doors, a 1-1/4 ChemGuard laminate top and a 21" x 28 pegboard and assorted hooks for storage. The mobile demo unit can be powered by a duplex outlet, an inlet and a 25' extension cord. It rolls easily on 4" locking, swivel casters and is finished with a non-emitting UV finish. Dimensions are 28"D x 48"W x 36"H. Weight: 250 lbs.
$2,894.00

DRAFT/DRAW-TOWER W/PLATFORM & UDK

CDTC-1VTSP UDK
Our top selling table for drafting and computer generated art use. Designed for rooms with limited space options, this table is perfect for drafting, graphic art and CAD. The solid maple pedestal legs support this sturdy table. A rear shelf (9-7/8"D x 42"W) can hold a computer monitor. The 42"W x 30"D adjustable top has a soft close feature and includes a pencil stop. The unit can be ordered with a CPU holder or with locking storage for either a desktop or tower model computer. Other options include: Flat panel monitor arm, stationary monitor platform, and factory installed under-desk keyboard tray, Vyco cover board and parallel straight rule. Fully assembled. Overall dimensions: 42"W X 40"D X 30"H
$2,899.00

DRAFTING TABLE

DT-8A
This deluxe unit has a plywood cabinet and solid maple apron and legs. Base includes six locking drawers (20-1/2" x 19-3/4"D), master-keyed separately. The drawers are completely finished and dovetailed on all four sides. The almond colored plastic laminate 2-piece 3/4" top has an adjustable side (33"W x 32-1/2"D) and a flat reference side (15W" x 32-1/2"D). Adjustable side has a pencil stop and includes the soft-close feature. The top adjusts from 0 to 30 degrees. The unit is finished with an earth-friendly UV finish. Overall size: 48"W x 32-1/2"D x 39-3/4"H
$2,905.00

MOBILE MICRO-CHARGE STATION

4741K
A mobile oak cabinet that is equipped to recharge microscopes while they are safely stored behind locked doors. The peninsula style cabinet interior (7"W x 9"D x 15"H) holds 20 microscopes (ten each side). All this with only one electrical connection from the cabinet’s side. It is finished with a chemical resistant, earth-friendly UV finish. The 1-1/4" plastic laminate top doubles as a work surface. Mobile capacity: 500 lbs. Dimensions: 48"W x 30"D x 40-1/4"H. Weight: 311 lbs.
$2,905.00

2 STUDENT CENTER 66X30

C2716KF
Single faced tables that provide a fully equipped science center from two to eight students. Each unit is constructed of solid oak, and hardwood veneers. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with cold water faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. Choose from models with a full cupboard only or a half cupboard and dovetailed drawers. Can be ordered without sink, fixtures and rod sockets. They are finished with a chemical resistant, earth-friendly UV finish. Single face two-student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" epoxy resin or 3/4" phenolic resin tops.
$2,918.00

LAPTOP STORAGE/RECHARGING CENTER

5301K
A safe, efficient and mobile way to handle laptop computers. Sliding hardwood plywood doors front and back provide easy access to storage as well as the charging station. Multiple outlet plug strips in the back section allow easy plug-in of up to 20 computers. The cords from the outlet strips can be fed through a hole in the floor of the unit so that the doors can be locked during charging. The wire dividers are perforated and a fan and vent is provided to minimize heat buildup during charging. Constructed of oak and oak veneers with a 1-1/4" high pressure laminate work surface. This unit rolls easily on 4" ball bearing, locking, swivel casters.
$2,919.00

PARTS STORAGE CABINET - 80 BINS

PSC-80
Whether you are storing bolts, paints or threads, this unit is the perfect solutions for storing small parts. Constructed of maple veneers and banded with solid maple (with a 3/4" thick back), and finished an earth-friendly UV finish. It has a 3-point locking doors that are hung on five knuckle institutional hinges. Included in the unit are three adjustable shelves and 80 plastic bins.
$2,946.00

MOBILE ADA LAB W/ CHEM TOP

4352KF-RS
Perfect for the physically impaired or for classroom demos. Constructed of solid oak, hardwood and oak veneers with a chemical resistant, earth-friendly UV finish. The 1-1/4" ChemGuard top is supplied with or without a stainless steel look sink, toggle switch water pump, two 2-1/2 gallon supply and waste containers, GFI AC duplex receptacle with inlet socket, 25' extension cord, and two rod sockets installed in the table top. Mobile capacity of 500 lbs. it rolls easily on 4" ball-bearing swivel casters with brakes. Dovetailed drawers are constructed of plywood and ride on epoxy coated glides. Cupboard door and drawers have locks. Wheelchair accessible from two sides, measures 32"W x 29"H. Inside drawers measure: 14.5"W x 19"D x 6"H. Dimensions: 72"L x 24"D x 33"H. Weight: 240 lbs.
$2,956.00

4 STUDENT CUPBOARD TABLE CHEM

C2302K
Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.
$2,975.00