Science Labs

This table has everything you could want. It adjusts easily from 27-3/4" to 39"H (42" with included spacer) in 2 cm increments in less than 30 seconds without the use of tools. Its apron is solid maple or oak and finished with a chemical resistant finish. It has a riser that provides extra workspace for each person to put his or her tools or laptop. The table has three top options: plastic laminate, chemical resistant laminate and phenolic resin. The riser’s horizontal surface matches your choice of top surface. The 12"D riser is supported by six 1" diameter powder coated steel tubes. The riser is 10" above the table surface. Tabletop measures 30"D x 60"W.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Our top selling table for drafting and computer generated art use. Designed for rooms with limited space options, this table is perfect for drafting, graphic art and CAD. The solid maple pedestal legs support this sturdy table. A rear shelf (9-7/8"D x 42"W) can hold a computer monitor. The 42"W x 30"D adjustable top has a soft close feature and includes a pencil stop. The unit can be ordered with a CPU holder or with locking storage for either a desktop or tower model computer. Other options include: Flat panel monitor arm, stationary monitor platform, and factory installed under-desk keyboard tray, Vyco cover board and parallel straight rule. Fully assembled. Overall dimensions: 42"W X 40"D X 30"H

Perfect for the physically impaired or for classroom demos. Constructed of solid oak, hardwood and oak veneers with a chemical resistant, earth-friendly UV finish. The 1-1/4" ChemGuard top is supplied with or without a stainless steel look sink, toggle switch water pump, two 2-1/2 gallon supply and waste containers, GFI AC duplex receptacle with inlet socket, 25' extension cord, two rod sockets, two each 3/4" diameter x 36" long upright rods, 1/2" x 40" crossbar and two rod clamps. With a mobile capacity of 500 lbs. it rolls easily on 4" ball-bearing swivel casters with brakes. Dovetailed drawers are constructed of plywood and ride on epoxy coated glides. Cupboard door and drawers have locks. Wheelchair accessible from two sides, measures 32"W x 29"H. Inside drawers measure: 14.5"W x 19"D x 6"H. Dimensions: 72"L x 24"D x 33"H. Weight: 240 lbs.

Our top selling table for drafting and computer generated art use. Designed for rooms with limited space options, this table is perfect for drafting, graphic art and CAD. The solid maple pedestal legs support this sturdy table. A rear shelf (9-7/8"D x 42"W) can hold a computer monitor. The 42"W x 30"D adjustable top has a soft close feature and includes a pencil stop. The unit can be ordered with a CPU holder or with locking storage for either a desktop or tower model computer. Other options include: Flat panel monitor arm, stationary monitor platform, and factory installed under-desk keyboard tray, Vice cover board and parallel straight rule. Fully assembled. Overall dimensions: 42"W X 40"D X 30"H

Perfect table for STEAM projects. We’ve taken our popular oak and maple science tables and enhanced them by adding a riser. The table features solid oak or maple (your choice) aprons and riser supports finished with a chemical resistant finish. The riser has 10" clearance above the work surface and is 12"D and made of the same material as the top you choose. Top options include: plastic laminate, chemical resistant laminate, phenolic resin and epoxy resin. All 72"W tables include leg braces and a stretcher for added strength. Tables stand 30"H. The top of the riser is 41" from the floor.

Plywood cabinet with solid maple apron and legs make this the perfect table for everyday use by two students. Center cabinet has six dovetailed locking drawers (10-1/2"W x 19-3/4"D x 2"H), master-keyed separately and a book compartment (11"W x 22"D x 5"H). It has two fully adjustable plastic laminate tops (24"W x 24"D) and a fixed reference area of (12"W x 24"D). The adjustable top is furnished with a soft-close and a pencil stop. The top adjusts from 0 to 30 degrees. The unit is finished with an earth-friendly UV finish.

We've put fun into drawing with our light table! This table is constructed of a maple hard wood frame and a plastic laminate almond colored top. The shatter-resistant glass inset gives maximum diffusion of light with minimum glare and no hot spots. The top adjusts from 0-30 degrees and is equipped with a soft-close feature and a pencil stop. Easy to plug in (installed 120 volt electrical cord). Four energy efficient fluorescent tubes are included. Top size: 39-3/4"H x 44"W x 24"D

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Store various materials with these large totes. Constructed of oak veneers and solid oak with a chemical resistant, earth-friendly UV finish. With a mobile capacity of 500 lbs., this unit rolls easily on 4" locking swivel casters. The two lockable doors swing 270° and include 21 hard plastic tote trays. Tote trays measure 19"L x 14-1/4"W x 3-1/2"H. Plastic laminate top can double as a work surface. Overall unit measures: 48"W x 24"D x 41-1/2"H.

The Corrosive Chemical Storage Cabinet is the solution for storing non-flammable acids and corrosive liquids. This storage cabinet is constructed of 3/4" thick exterior grade plywood with a finished top and lined with a 1/4" polypropylene interior. Included is a removable back panel to access the venting behind the cabinet, 2" plastic containment drip pan, (1) lined adjustable shelf and 96mm pulls. This unit is available in either two doors or single door and is finished in Northwood’s UV finish.

Our top selling table for drafting and computer generated art use. Designed for rooms with limited space options, this table is perfect for drafting, graphic art and CAD. The solid maple pedestal legs support this sturdy table. A rear shelf (9-7/8"D x 42"W) can hold a computer monitor. The 42"W x 30"D adjustable top has a soft close feature and includes a pencil stop. The unit can be ordered with a CPU holder or with locking storage for either a desktop or tower model computer. Other options include: Flat panel monitor arm, stationary monitor platform, and factory installed under-desk keyboard tray, Vyco cover board and parallel straight rule. Fully assembled. Overall dimensions: 42"W X 40"D X 30"H