Science Labs

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Single faced tables that provide a fully equipped science center from two to eight students. Each unit is constructed of solid oak, and hardwood veneers. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with cold water faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. Choose from models with a full cupboard only or a half cupboard and dovetailed drawers. Can be ordered without sink, fixtures and rod sockets. They are finished with a chemical resistant, earth-friendly UV finish. Single face two-student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" epoxy resin or 3/4" phenolic resin tops.

The drawing table system lets you choose from 11 table options. Besides the plain model the options include: six drawers, board storage for six, and combination six drawer with board storage. The deluxe model also includes a CPU holder, a monitor arm, keyboard tray, and mouse tray. All units are constructed of solid maple framing and reinforced with 13-gauge steel corner braces. Your choice of a one- or two-piece top made of 3/4" almond colored plastic laminate and equipped with a soft-close feature and a pencil stop. The top adjusts from 0 to 30 degrees. On the one-piece top models, the fully adjustable top measures 42"W x 30." On the two-piece top, the 30" x 30" left side of the top can be fully adjusted and is equipped with a soft-close feature and a pencil stop with a 12"W x 30"D flat top on the right side of the unit. CPU holder dimensions are 23"H x 11" W x 29"D (all adjustable). All the doors and drawers lock, and the drawers are completely finished and dovetailed on all four sides. The board storage models has six (25-1/4"H x 24-3/8"D x 1-1/4"W) spaces for drawing boards. Overall size:42"W x 30"D x 39-3/4"H.

Single faced tables that provide a fully equipped science center from two to eight students. Each unit is constructed of solid oak, and hardwood veneers. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with cold water faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. Choose from models with a full cupboard only or a half cupboard and dovetailed drawers. Can be ordered without sink, fixtures and rod sockets. They are finished with a chemical resistant, earth-friendly UV finish. Single face two-student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" epoxy resin or 3/4" phenolic resin tops.

Robotic team storage for three robots and supplies. The maple plywood workbench provides three separate storage compartments. Each compartment has a rollout shelf which holds up to an 18" square robot. Also, within the compartment is a separate drawer with a customizable foam insert (included) to store tools (not included). Each compartment is outfitted to accept a combination lock. The top is ShopTop(R), which sandwiches a medium-density fiberboard between two layers of 1/2" high-density particleboard, creating a non-conductive and splinter proof top. The top is 1-1/4" thick and can be extended an extra 8" by raising it and locking. Lowering the extension allows the unit to fit through standard doorways and moves easily on six 4" heavy-duty, locking casters.

This beautiful oak cabinet with tempered glass doors is finished with a chemical resistant, earth-friendly UV finish. It is equipped to recharge up to 16 cordless microscopes (not included) within eight hours while it is safely stored behind locked doors (Microscope Dimensions: 8-3/4"W x 12-1/4"D x 16-3/4"H). All this with only one electrical connection. The microscopes are protected from theft by a three-point locking handle. Overall size: 36"W x 16"D x 84"H.

This unique table gives you the ability to change it as your needs change. Basic unit comes with a 60"W x 30"D x 36"H table that is reinforced with welded steel angle understructure. Cabinets can be mounted to the underside of the table and attached using a solid bolt connection. The unit comes standard with one cabinet, but there is enough room for two cabinets to be hung from the table. The cabinets measure 24"W x 22-1/2"D x 28-1/2"H. Choose from three cabinet options: drawer over door (with one adjustable shelf), Single door (with one adjustable shelf) and Drawer (two upper drawers and a file drawer). The doors and drawers lock. The top is 1" solid epoxy resin. The unit is finished with a non-emitting UV finish.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Complete demonstration center constructed of solid oak, oak hardwood and oak veneers. It is finished with a chemical resistant, earth-friendly UV finish. Included are four drawers (three small, one file), and a large cupboard. The drawers are expertly crafted from the finest materials with dovetail joinery throughout. Drawers run on epoxy-coated steel glides with nylon bearings for smooth operation. All units come with a GFI protected AC duplex receptacle. You can order with/without these options: combination cold water/gas fixtures, and polypropylene trap. Comes standard with pull-out writing board, support rod with crossbar, rubber base molding and locks for cupboard and all drawers. Dimensions: Overall: 60"L x 30"D x 36"H, Knee space: 22"W x 32-1/2"D, Pull-out: 3/4"H x 16-1/4"W x 25-1/4"D, Small Drawers: 13-1/2"W x 18"D x 4"H, file Drawer: 13-1/2"W x 18"D x 10-1/4"H, Cupboard: 19-1/2"W x 28"D x 29-1/2"H

Complete demonstration center constructed of solid oak, oak hardwood and oak veneers. It is finished with a chemical resistant, earth-friendly UV finish. Included are four drawers (three small, one file), and a large cupboard. The drawers are expertly crafted from the finest materials with dovetail joinery throughout. Drawers run on epoxy-coated steel glides with nylon bearings for smooth operation. All units come with a GFI protected AC duplex receptacle. You can order with/without these options: combination cold water/gas fixtures, and polypropylene trap. Comes standard with pull-out writing board, support rod with crossbar, rubber base molding and locks for cupboard and all drawers. Dimensions: Overall: 60"L x 30"D x 36"H, Knee space: 22"W x 32-1/2"D, Pull-out: 3/4"H x 16-1/4"W x 25-1/4"D, Small Drawers: 13-1/2"W x 18"D x 4"H, file Drawer: 13-1/2"W x 18"D x 10-1/4"H, Cupboard: 19-1/2"W x 28"D x 29-1/2"H

Self-contained demo center is constructed of quality solid hardwood, and oak veneers with a chemical resistant, earth-friendly UV finish. Features one file drawer with full extension glides, 3 smaller drawers (all dove-tailed) and two cupboard spaces with locks and wire pulls. The drawers run on epoxy-coated steel glides with nylon rollers. This demonstration center rolls easily on 4" locking swivel casters. This unit includes two rod sockets installed in the table top. Included to help organize storage is a handy removable storage tote tray and a pegboard with hooks. Electrical service is supplied by means of a 25' extension cord which can be connected to a GFI protected AC duplex receptacle installed in the side of the cabinet. The top is black 1-1/4" ChemGuard laminate. Unit can also be ordered with a flat top. Mobile capacity: 500 lbs. Overall dimensions: 30"D x 54"W x 36"H. Shipping weight 310 lbs.

The drawing table system lets you choose from 11 table options. Besides the plain model the options include: six drawers, board storage for six, and combination six drawer with board storage. The deluxe model also includes a CPU holder, a monitor arm, keyboard tray, and mouse tray. All units are constructed of solid maple framing and reinforced with 13-gauge steel corner braces. Your choice of a one- or two-piece top made of 3/4" almond colored plastic laminate and equipped with a soft-close feature and a pencil stop. The top adjusts from 0 to 30 degrees. On the one-piece top models, the fully adjustable top measures 42"W x 30." On the two-piece top, the 30" x 30" left side of the top can be fully adjusted and is equipped with a soft-close feature and a pencil stop with a 12"W x 30"D flat top on the right side of the unit. CPU holder dimensions are 23"H x 11" W x 29"D (all adjustable). All the doors and drawers lock, and the drawers are completely finished and dovetailed on all four sides. The board storage models has six (25-1/4"H x 24-3/8"D x 1-1/4"W) spaces for drawing boards. Overall size:42"W x 30"D x 39-3/4"H.

This mobile unit is equipped with two storage compartments. The three drawers (one file, two box) have dovetail joints and run smoothly on epoxy coated steel glides. Includes a pull-out writing board, locks for drawers and doors, two 2-1/2 gallon water bottles with connecting hoses, two 3/4 diameter upright rods, one 1/2" diameter crossbar, two connecting clamps and two rod sockets installed in the table top. In addition it has a 15" x 13" x 5" stainless steel sink with a hand pump, a 1-1/4 ChemGuard laminate top and a 21" x 28 pegboard and assorted hooks for storage. The mobile demo unit can be powered by a duplex outlet, an inlet and a 25' extension cord. It rolls easily on 4" locking, swivel casters and is finished with a non-emitting UV finish. Dimensions are 28"D x 48"W x 36"H. Weight: 250 lbs.

This beautiful oak cabinet with tempered glass doors is finished with a chemical resistant, earth-friendly UV finish. It is equipped to recharge up to 16 cordless microscopes (not included) within eight hours while it is safely stored behind locked doors (Microscope Dimensions: 8-3/4"W x 16-3/4"H). All this with only one electrical connection. The microscopes are protected from theft by a three-point locking handle. Overall size: 36"W x 84"H. 

Provides drawing space for two students and storage for multiple classes. This compact unit has a plywood cabinet and solid maple aprons and legs. Choose from six or eight locking (master keyed separately) drawers (20-1/2"W x 19-3/4"D) that are completely finished and dovetailed on all four sides. The top is a 3/4" almond colored plastic laminate. There are two fully adjustable drawing areas (28"W x 32-1/2"D) with pencil stops and soft close. There is also a flat area in the middle (14"W x 32-1/2"D), which provides an area for palettes and papers. The top adjusts from 0-30 degrees. The apron and legs are of solid maple and finished with an earth-friendly UV finish. Overall size: 70"W x 32-1/2"D x 39-3/4"H.

High quality stainless steel sinks for your toughest cleaning tasks. Whether you need a drain board model or a stainless steel utility/prep basin, we have the right model for you. These one, two and three compartment sinks are perfect for washing, rinsing, and sanitizing. The 1-1/2" rounded front and side edges help contain splashes. The 18 gauge T-304 Stainless Steel is NSF certified and boosts optimum strength and durability. These sinks are safe for food prep. Stainless sinks all come with 1-5/8" galvanized legs with 1" adjustable high impact corrosion resistant feet, accommodate 8" on center faucets and have a 9” back splash. Select models come with 1/4" pitched drain boards to ensure proper drainage. Each sink has a 3-1/2" drain included. 36"H at sink front, 43-3/4"H at top of back splash. Uses fixture #250784. NSF approved.

Whether you are storing paper, rocks, or insects this unit will fit the bill. Seven large drawers (4"H x 44"W x 26"D) big enough to hold large flat objects, each has a maximum weight limit of 100 lbs. The three shelves (two adjustable) allow you to store over-sized items like models. Unit is constructed of your choice of maple or oak veneers and hardwoods with an earth-friendly, chemical-resistant UV finish. It has a three-point locking handle system.

This unique table gives you the ability to change it as your needs change. Basic unit comes with a 60"W x 30"D x 36"H table that is reinforced with welded steel angle understructure. Cabinets can be mounted to the underside of the table and attached using a solid bolt connection. The unit comes standard with one cabinet, but there is enough room for two cabinets to be hung from the table. The cabinets measure 24"W x 22-1/2"D x 28-1/2"H. Choose from three cabinet options: drawer over door (with one adjustable shelf), Single door (with one adjustable shelf) and Drawer (two upper drawers and a file drawer). The doors and drawers lock. The top is 1" solid epoxy resin. The unit is finished with a non-emitting UV finish.

Durable lab table features a large 68" x 36" tabletop. It comes standard with two combination cold water/gas fixtures and one GFI AC electrical receptacle. Your choice of two cabinets: Full door cabinet with adjustable shelves or door/drawer cabinet with a drawer and storage area with one adjustable shelf. They are finished with a chemical resistant, earth-friendly UV finish. An 18" wide removable panel is located between the storage cabinets and provides access to all utilities. Unit can be ordered with a drop-in sink or with a flat top without sink or fixtures. Assembly and installation of electricity and plumbing is required. Dimensions: 68"W x 36"D x 36"H.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

This unique table gives you the ability to change it as your needs change. Basic unit comes with a 60"W x 30"D x 36"H table that is reinforced with welded steel angle understructure. Cabinets can be mounted to the underside of the table and attached using a solid bolt connection. The unit comes standard with one cabinet, but there is enough room for two cabinets to be hung from the table. The cabinets measure 24"W x 22-1/2"D x 28-1/2"H. Choose from three cabinet options: drawer over door (with one adjustable shelf), Single door (with one adjustable shelf) and Drawer (two upper drawers and a file drawer). The doors and drawers lock. The top is 1" solid epoxy resin. The unit is finished with a non-emitting UV finish.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)