Diversified

Display your models with this torso cabinet that includes a pull-out shelf for a torso plus one fixed and three adjustable shelves for your other models. Oak veneer cabinet with a tempered glass door framed by solid oak. The door has institutional hinges and 3-point locking handles. In addition the cabinet is finished with a safe UV chemical resistant finish and rubber base molding.

Two 18 gauge T-304 stainless steel series of prep tables: one completely of stainless steel, the other with a stainless steel top and sink, with galvanized legs and under shelf. Both series have a 16” x 20” x 10”D stainless steel bowl with holes for a deck mounted faucet and include a basket drain. Faucet sold separately. 1” x 2” tubular channels run left to right under the work surface. Then connecting the tubular channels is a 1” x 2” hat channel which reinforces and maintains a level working surface. The back splash is 5”H and all edges are rounded for safety. The shelves can be adjusted to your preferred height. Prep sinks are NSF approved. Choose from models with either a left or right hand sink. The work height is 35-3/4”H and have 1-5/8” diameter legs. Uses fixture #250786. NSF approved.

Two 18 gauge T-304 stainless steel series of prep tables: one completely of stainless steel, the other with a stainless steel top and sink, with galvanized legs and under shelf. Both series have a 16” x 20” x 10”D stainless steel bowl with holes for a deck mounted faucet and include a basket drain. Faucet sold separately. 1” x 2” tubular channels run left to right under the work surface. Then connecting the tubular channels is a 1” x 2” hat channel which reinforces and maintains a level working surface. The back splash is 5”H and all edges are rounded for safety. The shelves can be adjusted to your preferred height. Prep sinks are NSF approved. Choose from models with either a left or right hand sink. The work height is 35-3/4”H and have 1-5/8” diameter legs. Uses fixture #250786. NSF approved.

The Corrosive Chemical Storage Cabinet is the solution for storing non-flammable acids and corrosive liquids. This storage cabinet is constructed of 3/4" thick exterior grade plywood with a finished top and lined with a 1/4" polypropylene interior. Included is a removable back panel to access the venting behind the cabinet, 2" plastic containment drip pan, (1) lined adjustable shelf and 96mm pulls. This unit is available in either two doors or single door and is finished in Northwood’s UV finish.

The Corrosive Chemical Storage Cabinet is the solution for storing non-flammable acids and corrosive liquids. This storage cabinet is constructed of 3/4" thick exterior grade plywood with a finished top and lined with a 1/4" polypropylene interior. Included is a removable back panel to access the venting behind the cabinet, 2" plastic containment drip pan, (1) lined adjustable shelf and 96mm pulls. This unit is available in either two doors or single door and is finished in Northwood’s UV finish.

This table has everything you could want. It adjusts easily from 27-3/4" to 39"H (42" with included spacer) in 2 cm increments in less than 30 seconds without the use of tools. Its apron is solid maple or oak and finished with a chemical resistant finish. It has a riser that provides extra workspace for each person to put his or her tools or laptop. The table has three top options: plastic laminate, chemical resistant laminate and phenolic resin. The riser’s horizontal surface matches your choice of top surface. The 12"D riser is supported by six 1" diameter powder coated steel tubes. The riser is 10" above the table surface. Tabletop measures 30"D x 60"W.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

The Intermix Workstation fosters collaboration and encourages productivity! Created of solid oak veneers and finished with a chemical resistant, earth-friendly UV finish. These mobile units come with 4" locking casters for ease of use. All units have a 60" high-pressure laminate top, available in a variety of color options. 4-door Cabinet model with two locking cabinets back to back, each measuring 30"W x 15"D with an adjustable shelf. 30" high.

Functional Table That Is Customizable To Fit Any Space, Heavy Duty 11 Gauge White Steel Frame, 1-1/2" Shop, Top, 60"W x 36"D x 30"H

Functional Table That Is Customizable To Fit Any Space, Heavy Duty 11 Gauge Silver Steel Frame, 1-1/2" Shop, Top, 60"W x 36"D x 30"H

Functional Table That Is Customizable To Fit Any Space, Heavy Duty 11 Gauge Orange Steel Frame, 1-1/2" Shop, Top, 60"W x 36"D x 30"H