Diversified

Functional Table That Is Customizable To Fit Any Space, Heavy Duty 11 Gauge White Steel Frame, 3/4" Phenolic, Top, 60"W x 42"D x 36"H

Functional Table That Is Customizable To Fit Any Space, Heavy Duty 11 Gauge Orange Steel Frame, 3/4" Phenolic, Top, 60"W x 42"D x 36"H

Functional Table That Is Customizable To Fit Any Space, Heavy Duty 11 Gauge Silver Steel Frame, 3/4" Phenolic, Top, 60"W x 42"D x 36"H

Functional Table That Is Customizable To Fit Any Space, Heavy Duty 11 Gauge Black Steel Frame, 3/4" Phenolic, Top, 60"W x 42"D x 36"H

Constructed of heavy Gauge steel members which can be combined in a number of ways using any one of 3 tops, lower shelf, back and end stops. A wide variety of sizes is possible. Legs are welded construction with floor feet and include a three quarter deep lower shelf and rear stringer. Color: gray. Choice of three tops include: 1) 12 gauge steel top wrapped over 2" thick core, 2) 1-3/4" Maple top, 3) 2-1/4" Maple top. Height varies with top selected.

Finally a lectern to match the rest of the furniture in your skilled spaces.This lectern is constructed of maple veneers with and has two fixed shelves and a compartment for storing our popular privacy panels—12 Test Dividers (253244) included. All models roll easily on four 2"H casters. Overall size: 49-1/2"H (student side) 43-1/2"H (instructor side). The large work surface (25"W x 22"D) includes a pencil edge and is at a 15 degree angle.

Constructed of heavy Gauge steel members which can be combined in a number of ways using any one of 3 tops, lower shelf, back and end stops. A wide variety of sizes is possible. Legs are welded construction with floor feet and include a three quarter deep lower shelf and rear stringer. Color: gray. Choice of three tops include: 1) 12 gauge steel top wrapped over 2" thick core, 2) 1-3/4" Maple top, 3) 2-1/4" Maple top. Height varies with top selected.

A safe, efficient and mobile way to handle laptop computers. Sliding hardwood plywood doors front and back provide easy access to storage as well as the charging station. Multiple outlet plug strips in the back section allow easy plug-in of up to 20 computers. The cords from the outlet strips can be fed through a hole in the floor of the unit so that the doors can be locked during charging. The wire dividers are perforated and a fan and vent is provided to minimize heat buildup during charging. Constructed of oak and oak veneers with a 1-1/4" high pressure laminate work surface. This unit rolls easily on 4" ball bearing, locking, swivel casters.

Single faced tables that provide a fully equipped science center from two to eight students. Each unit is constructed of solid oak, and hardwood veneers. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with cold water faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. Choose from models with a full cupboard only or a half cupboard and dovetailed drawers. Can be ordered without sink, fixtures and rod sockets. They are finished with a chemical resistant, earth-friendly UV finish. Single face two-student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" epoxy resin or 3/4" phenolic resin tops.

A mobile oak cabinet that is equipped to recharge microscopes while they are safely stored behind locked doors. The peninsula style cabinet interior (7"W x 9"D x 15"H) holds 20 microscopes (ten each side). All this with only one electrical connection from the cabinet’s side. It is finished with a chemical resistant, earth-friendly UV finish. The 1-1/4" plastic laminate top doubles as a work surface. Mobile capacity: 500 lbs. Dimensions: 48"W x 30"D x 40-1/4"H. Weight: 311 lbs.

This deluxe unit has a plywood cabinet and solid maple apron and legs. Base includes six locking drawers (20-1/2" x 19-3/4"D), master-keyed separately. The drawers are completely finished and dovetailed on all four sides. The almond colored plastic laminate 2-piece 3/4" top has an adjustable side (33"W x 32-1/2"D) and a flat reference side (15W" x 32-1/2"D). Adjustable side has a pencil stop and includes the soft-close feature. The top adjusts from 0 to 30 degrees. The unit is finished with an earth-friendly UV finish. Overall size: 48"W x 32-1/2"D x 39-3/4"H

Two 18 gauge T-304 stainless steel series of prep tables: one completely of stainless steel, the other with a stainless steel top and sink, with galvanized legs and under shelf. Both series have a 16” x 20” x 10”D stainless steel bowl with holes for a deck mounted faucet and include a basket drain. Faucet sold separately. 1” x 2” tubular channels run left to right under the work surface. Then connecting the tubular channels is a 1” x 2” hat channel which reinforces and maintains a level working surface. The back splash is 5”H and all edges are rounded for safety. The shelves can be adjusted to your preferred height. Prep sinks are NSF approved. Choose from models with either a left or right hand sink. The work height is 35-3/4”H and have 1-5/8” diameter legs. Uses fixture #250786. NSF approved.