Diversified

Need all your services in one place or looking to add a wall of cabinets that include services? The Wall Service Bench offers storage and services all in one unit. Constructed of solid hardwood and oak veneer plywood. The Wall Service Bench features your choice of a 1" solid epoxy resin or phenolic resin top with a 18"W x 15"D x 11"H epoxy resin sink and two combination cold water/gas fixtures. The sink area allows access to the plumbing and provides a large storage space with two GFI protected AC duplex electrical outlets. There is enough room in the sink area to allow two 24"D tables to be butted against the unit for use as a peninsula work area. The outer ends of the unit offer four storage solutions: Doors with Adjustable Shelves, Doors/Drawer Combination w/1 Adjustable Shelf, 4 Drawers/doors w/1 Adjustable Shelf and 4 Drawers. All drawers and doors have locks and ADA compliant pulls. The unit is finished with a chemical resistant, earth-friendly UV finish and includes rubber base molding. Dimensions: 108"L x 24"D x 36"H.

Base consists of a double-faced heavy gauge steel unit, welded and riveted throughout. The unit provides 12 vertical locker openings which measure 12"W x 21"D x 15"H. Vented doors have spring loaded hinges, padlock hasp, and knockout plug for cylinder locks. Top is constructed of 2-1/4" maple. Available with or without four vises. Available in either gray or black base units. Overall size: 64"W x 54"D x 33-1/4"H

Base consists of a double-faced heavy gauge steel unit, welded and riveted throughout. The unit provides 12 vertical locker openings which measure 12"W x 21"D x 15"H. Vented doors have spring loaded hinges, padlock hasp, and knockout plug for cylinder locks. Top is constructed of 2-1/4" maple. Available with or without four vises. Available in either gray or black base units. Overall size: 64"W x 54"D x 33-1/4"H

Our drying cabinets are designed for drying and storing green ware and clay pieces. They're constructed of13-gauge angles steel pieces welded to 3/4, 16-gauge expanded steel mesh. Top and bottom panels are16-gauge steel. This design provides full air circulation. The four shelves are constructed with 1/8" perforated hardboard, and is supported by fixed welded brackets. Dark brown with antique gold doors. 200 lb.

Double faced tables that provide a fully equipped science center from four to sixteen students. Each unit is constructed of solid oak, oak and hardwood veneers and finished with a chemical resistant, earth-friendly UV finish. The double faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with cold water faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. Choose from models with a full cupboard only or half cupboard and dovetailed drawers. Can be ordered without sink, fixtures and rod sockets. Double face four student unit measures 66"L x 48"W x 36"H. Add 66" in length for each four students.

Double faced unit has a cabinet with doors and an adjustable shelf on each side. The locking doors have pulls and are hung on five knuckle institutional hinges. The base of the unit is constructed of solid maple and maple veneers. The 2-1/4" thick top is hard maple. The unit is finished with an earth-friendly UV finish. Unit can be ordered with or without vises. Overall size: 64"W x 54"D x 31-1/4"H.

This workbench is perfect for storing different types of items. The art bench is designed to be used by four people and has a 64"W x 54"D x 2-1/4" thick maple top. One side of the workbench has storage for flat items, like paper or metal sheets. The six locking drawers are dovetailed and have full extension glides. The inside drawer dimensions are: 32"W x 22"D x 1-3/8"H. The opposite side of the workbench has two locking doors with an adjustable shelf inside the storage cabinet. Can be ordered with or without 4 vises. Overall size: 64"W x 54"D x 31.25"H

Double faced tables that provide a fully equipped science center from four to sixteen students. Each unit is constructed of solid oak, oak and hardwood veneers and finished with a chemical resistant, earth-friendly UV finish. The double faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with cold water faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. Choose from models with a full cupboard only or half cupboard and dovetailed drawers. Can be ordered without sink, fixtures and rod sockets. Double face four student unit measures 66"L x 48"W x 36"H. Add 66" in length for each four students.

A unique mobile cabinet that allows the user to store, move and use many electronic devises at one time. The unit has ample storage with two dovetailed drawers and cabinets with adjustable shelves for things like projectors, printers, laptops, and general supply items. The 1” phenolic resin top is both chemical resistant and easy to clean. The top has a cutout section (21.75”W x 17.25”D) where a monitor can be attached to a flat panel monitor arm. A monitor (not included) can adjust to be exposed above the cabinet, or used in the cabinet and seen through a Plexiglas panel that fits over the opening. A phenolic panel is also included for times when the monitor is not needed. The unit includes a pullout keyboard tray, 2 data ports, an extension cord, a duplex outlet and an inlet plug. On the backside of the unit, doors provide access to a power-strip, which has 8 outlets. Throughout the unit there are holes for running cables to the appropriate areas. Venting is cleverly disguised in the bottom of the unit. This unit is available in either oak or maple veneer and is finished in a chemical resistant finish. Overall size: 74"W x 32"D x 36"H.

This series offers 1-3/4" maple tops and 4 bench lengths and 3 locker styles to choose from. The all-welded, 1-section construction has reinforced side panels (20-gauge). Locker doors (18-gallon) have air vents, spring hinges, padlock hasp & knockout plug for cylinder lock. Choose between vertical lockers, horizontal lockers or double door bases. Your choice of black or gray baked enamel finish. Counter tops need to be attached during assembly. 32-3/4"H.

This series offers 1-3/4" maple tops and 4 bench lengths and 3 locker styles to choose from. The all-welded, 1-section construction has reinforced side panels (20-gauge). Locker doors (18-gallon) have air vents, spring hinges, padlock hasp & knockout plug for cylinder lock. Choose between vertical lockers, horizontal lockers or double door bases. Your choice of black or gray baked enamel finish. Counter tops need to be attached during assembly. 32-3/4"H.

A unique mobile cabinet that allows the user to store, move and use many electronic devises at one time. The unit has ample storage with two dovetailed drawers and cabinets with adjustable shelves for things like projectors, printers, laptops, and general supply items. The 1” phenolic resin top is both chemical resistant and easy to clean. The top has a cutout section (21.75”W x 17.25”D) where a monitor can be attached to a flat panel monitor arm. A monitor (not included) can adjust to be exposed above the cabinet, or used in the cabinet and seen through a Plexiglas panel that fits over the opening. A phenolic panel is also included for times when the monitor is not needed. The unit includes a pullout keyboard tray, 2 data ports, an extension cord, a duplex outlet and an inlet plug. On the backside of the unit, doors provide access to a power-strip, which has 8 outlets. Throughout the unit there are holes for running cables to the appropriate areas. Venting is cleverly disguised in the bottom of the unit. This unit is available in either oak or maple veneer and is finished in a chemical resistant finish. Overall size: 74"W x 32"D x 36"H.