Diversified

Functional Table That Is Customizable To Fit Any Space, Heavy Duty 11 Gauge White Steel Frame, 1-3/4" Walnut, Top, 60"W x 48"D x 36"H

Cabinet is constructed of solid maple and maple veneer. The interior on the upper half, including the doors, is lined with 1/4" pegboard. The lower half has one fixed and two adjustable 1" plywood shelves. Both sets of doors include locks. Unit includes assorted tool pegs, mounted plug mold strip with six outlets, switch, breaker, cord, and plug. Three sizes of totes are sold separately. Overall size: 48"W x 22"D x 84"H.

Cabinet is constructed of solid maple and maple veneer. The interior on the upper half, including the doors, is lined with 1/4" pegboard. The lower half has one fixed and two adjustable 1" plywood shelves. Both sets of doors include locks. The cabinet can be ordered with or without tools—they are designed for a variety of tool combinations and with tools for a specific use. Three sizes of totes are also available and sold separately. Overall size: 60"W x 22"D x 84"H

Double faced unit has four doors and drawers. The locking drawers are fully dovetailed and roll easily on epoxy coated glides. The locking doors have pulls and are hung on five knuckle institutional hinges. The base of the unit is constructed of solid maple and maple veneers. The 2-1/4" thick top is hard maple. The unit is finished with an earth-friendly UV finish. Unit can be ordered with or without vises. Overall size: 64"W x 54"D x 31-1/4"H

Constructed of solid maple and maple veneers with an earth- friendly UV finish. The unit includes seven pullout shelves behind locking doors (42-15/16"W x 26-1/4"D, inside dimensions) and eight drawers (19-15/16"W x 18"D, inside dimensions) drawers are fully dovetailed and include locks. Available in 1-3/4" solid maple top or 1-1/4" almond color plastic laminate. This unit is meant to be against a wall. The back is unfinished. Overall size: 72"W x 30"D x 36"H.

No excuses—get organized with our tall clear tote storage unit that is part of our Open Storage Series. It includes 54 clear single depth Certwood totes that measure 12-1/4"W x 16-3/4"D x 3"H. The clear sturdy glides and tilt tote tray runners prevent the totes from falling out. Constructed of solid oak hardwoods with a chemical resistant, earth-friendly UV finish.

Designed for the efficient storage of lumber. Unit constructed of solid ash framing and interlocked uprights. Unit includes 28 each 1-1/4" diameter 20" long iron pipes, which are located for correct lumber support. Assembly required.

Complete demonstration center constructed of solid oak, oak hardwood and oak veneers. It is finished with a chemical resistant, earth-friendly UV finish. Included are four drawers (three small, one file), and a large cupboard. The drawers are expertly crafted from the finest materials with dovetail joinery throughout. Drawers run on epoxy-coated steel glides with nylon bearings for smooth operation. All units come with a GFI protected AC duplex receptacle. You can order with/without these options: combination cold water/gas fixtures, and polypropylene trap. Comes standard with pull-out writing board, support rod with crossbar, rubber base molding and locks for cupboard and all drawers. Dimensions: Overall: 60"L x 30"D x 36"H, Knee space: 22"W x 32-1/2"D, Pull-out: 3/4"H x 16-1/4"W x 25-1/4"D, Small Drawers: 13-1/2"W x 18"D x 4"H, file Drawer: 13-1/2"W x 18"D x 10-1/4"H, Cupboard: 19-1/2"W x 28"D x 29-1/2"H

Complete demonstration center constructed of solid oak, oak hardwood and oak veneers. It is finished with a chemical resistant, earth-friendly UV finish. Included are four drawers (three small, one file), and a large cupboard. The drawers are expertly crafted from the finest materials with dovetail joinery throughout. Drawers run on epoxy-coated steel glides with nylon bearings for smooth operation. All units come with a GFI protected AC duplex receptacle. You can order with/without these options: combination cold water/gas fixtures, and polypropylene trap. Comes standard with pull-out writing board, support rod with crossbar, rubber base molding and locks for cupboard and all drawers. Dimensions: Overall: 60"L x 30"D x 36"H, Knee space: 22"W x 32-1/2"D, Pull-out: 3/4"H x 16-1/4"W x 25-1/4"D, Small Drawers: 13-1/2"W x 18"D x 4"H, file Drawer: 13-1/2"W x 18"D x 10-1/4"H, Cupboard: 19-1/2"W x 28"D x 29-1/2"H

Single faced tables that provide a fully equipped science center from two to eight students. Each unit is constructed of solid oak, and hardwood veneers. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with cold water faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. Choose from models with a full cupboard only or a half cupboard and dovetailed drawers. Can be ordered without sink, fixtures and rod sockets. They are finished with a chemical resistant, earth-friendly UV finish. Single face two-student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" epoxy resin or 3/4" phenolic resin tops.

Cabinet is constructed of solid maple and maple veneer. The interior on the upper half, including the doors, is lined with 1/4" pegboard. The lower half has one fixed and two adjustable 1" plywood shelves. Both sets of doors include locks. The cabinet can be ordered with or without tools—they are designed for a variety of tool combinations and with tools for a specific use. Three sizes of totes are also available and sold separately. Overall size: 60"W x 22"D x 84"H

This series offers 1-3/4" maple tops and 4 bench lengths and 3 locker styles to choose from. The all-welded, 1-section construction has reinforced side panels (20-gauge). Locker doors (18-gallon) have air vents, spring hinges, padlock hasp & knockout plug for cylinder lock. Choose between vertical lockers, horizontal lockers or double door bases. Your choice of black or gray baked enamel finish. Counter tops need to be attached during assembly. 32-3/4"H.