Diversified

Book Compartment Tables are built with the same quality techniques as the plain apron table. They are finished with a chemical resistant, earth-friendly UV finish. These tables have either two or four book compartments (depending on size) installed in the apron. The book compartments measure 14" W x 13-5/8"D x 3-7/8"H. The table has a weight capacity of 500 lbs. On tables 72"W or over, we recommend ordering with leg braces and stretchers. (Shipped KD with tops attached)

A larger model of the plain pedestal table. Designed to be large enough for multiple users to work on projects. The base is constructed of two tapered solid maple pedestal style panel legs and two solid maple truss bars. Available in 1-3/4" solid maple top or 1-1/4" plastic laminate in either birch or almond color. Height option of 30"H or 36"H.

Constructed of heavy Gauge steel members which can be combined in a number of ways using any one of 3 tops, lower shelf, back and end stops. A wide variety of sizes is possible. Legs are welded construction with floor feet and include a three quarter deep lower shelf and rear stringer. Color: gray. Choice of three tops include: 1) 12 gauge steel top wrapped over 2" thick core, 2) 1-3/4" Maple top, 3) 2-1/4" Maple top. Height varies with top selected.

The Monitor UV Germicidal storage cabinet measures 24-1/2"W x 32"H x 9-1/2"D. Weighs 45 pounds. The cabinet holds 6 glasses or 5 goggles to a shelf on 8 shelves. With an average kill rate of 99.2%, the monitor provides excellent protection in 5 minutes. Shuts off automatically if the double doors are opened. Cabinet is constructed of 24 gauge white enameled steel. Pilot light confirms that the UV lamp is in use. Five minute cycle is controlled by a timer and doors are interlocked with tamper resistant latches. Germicidal lamp has a 20 year limited warranty. No assembly required. Lockable, two keys provided. Wall or shelf mountable with a 7' grounded electrical cord. Underwriters Laboratories Inc. Listed: File #E140818. No direct UV radiation escapes from cabinet when in use. Glasses or goggles not included.

This mobile unit is equipped with two storage compartments. The three drawers (one file, two box) have dovetail joints and run smoothly on epoxy coated steel glides. Includes a pull-out writing board, locks for drawers and doors, a 1-1/4 ChemGuard laminate top and a 21" x 28 pegboard and assorted hooks for storage. The mobile demo unit can be powered by a duplex outlet, an inlet and a 25' extension cord. It rolls easily on 4" locking, swivel casters and is finished with a non-emitting UV finish. Dimensions are 28"D x 48"W x 36"H. Weight: 250 lbs.

Our top selling table for drafting and computer generated art use. Designed for rooms with limited space options, this table is perfect for drafting, graphic art and CAD. The solid maple pedestal legs support this sturdy table. A rear shelf (9-7/8"D x 42"W) can hold a computer monitor. The 42"W x 30"D adjustable top has a soft close feature and includes a pencil stop. The unit can be ordered with a CPU holder or with locking storage for either a desktop or tower model computer. Other options include: Flat panel monitor arm, stationary monitor platform, and factory installed under-desk keyboard tray, Vyco cover board and parallel straight rule. Fully assembled. Overall dimensions: 42"W X 40"D X 30"H

Two 18 gauge T-304 stainless steel series of prep tables: one completely of stainless steel, the other with a stainless steel top and sink, with galvanized legs and under shelf. Both series have a 16” x 20” x 10”D stainless steel bowl with holes for a deck mounted faucet and include a basket drain. Faucet sold separately. 1” x 2” tubular channels run left to right under the work surface. Then connecting the tubular channels is a 1” x 2” hat channel which reinforces and maintains a level working surface. The back splash is 5”H and all edges are rounded for safety. The shelves can be adjusted to your preferred height. Prep sinks are NSF approved. Choose from models with either a left or right hand sink. The work height is 35-3/4”H and have 1-5/8” diameter legs. Uses fixture #250786. NSF approved.

Two 18 gauge T-304 stainless steel series of prep tables: one completely of stainless steel, the other with a stainless steel top and sink, with galvanized legs and under shelf. Both series have a 16” x 20” x 10”D stainless steel bowl with holes for a deck mounted faucet and include a basket drain. Faucet sold separately. 1” x 2” tubular channels run left to right under the work surface. Then connecting the tubular channels is a 1” x 2” hat channel which reinforces and maintains a level working surface. The back splash is 5”H and all edges are rounded for safety. The shelves can be adjusted to your preferred height. Prep sinks are NSF approved. Choose from models with either a left or right hand sink. The work height is 35-3/4”H and have 1-5/8” diameter legs. Uses fixture #250786. NSF approved.

A mobile oak cabinet that is equipped to recharge microscopes while they are safely stored behind locked doors. The peninsula style cabinet interior (7"W x 9"D x 15"H) holds 20 microscopes (ten each side). All this with only one electrical connection from the cabinet’s side. It is finished with a chemical resistant, earth-friendly UV finish. The 1-1/4" plastic laminate top doubles as a work surface. Mobile capacity: 500 lbs. Dimensions: 48"W x 30"D x 40-1/4"H. Weight: 311 lbs.

This deluxe unit has a plywood cabinet and solid maple apron and legs. Base includes six locking drawers (20-1/2" x 19-3/4"D), master-keyed separately. The drawers are completely finished and dovetailed on all four sides. The almond colored plastic laminate 2-piece 3/4" top has an adjustable side (33"W x 32-1/2"D) and a flat reference side (15W" x 32-1/2"D). Adjustable side has a pencil stop and includes the soft-close feature. The top adjusts from 0 to 30 degrees. The unit is finished with an earth-friendly UV finish. Overall size: 48"W x 32-1/2"D x 39-3/4"H

Single faced tables that provide a fully equipped science center from two to eight students. Each unit is constructed of solid oak, and hardwood veneers. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with cold water faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. Choose from models with a full cupboard only or a half cupboard and dovetailed drawers. Can be ordered without sink, fixtures and rod sockets. They are finished with a chemical resistant, earth-friendly UV finish. Single face two-student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" epoxy resin or 3/4" phenolic resin tops.

A safe, efficient and mobile way to handle laptop computers. Sliding hardwood plywood doors front and back provide easy access to storage as well as the charging station. Multiple outlet plug strips in the back section allow easy plug-in of up to 20 computers. The cords from the outlet strips can be fed through a hole in the floor of the unit so that the doors can be locked during charging. The wire dividers are perforated and a fan and vent is provided to minimize heat buildup during charging. Constructed of oak and oak veneers with a 1-1/4" high pressure laminate work surface. This unit rolls easily on 4" ball bearing, locking, swivel casters.