This unique table gives you the ability to change it as your needs change. Basic unit comes with a 60"W x 30"D x 36"H table that is reinforced with welded steel angle understructure. Cabinets can be mounted to the underside of the table and attached using a solid bolt connection. The unit comes standard with one cabinet, but there is enough room for two cabinets to be hung from the table. The cabinets measure 24"W x 22-1/2"D x 28-1/2"H. Choose from three cabinet options: drawer over door (with one adjustable shelf), Single door (with one adjustable shelf) and Drawer (two upper drawers and a file drawer). The doors and drawers lock. The top is 1" solid epoxy resin. The unit is finished with a non-emitting UV finish.
Base consists of a single-faced heavy gauge steel unit, welded and riveted throughout. The unit provides four horizontal locker openings which measure 18"W x 21"D x 15"H. Vented doors have spring loaded hinges, padlock hasp, and knockout plug for cylinder locks. Top is constructed of 2-1/4" maple. Available with or without vises. Available in either gray or black base unit. Overall size: 64"W x 28"D x 33-1/4"H.
Base consists of a single-faced heavy gauge steel unit, welded and riveted throughout. The unit provides four horizontal locker openings which measure 18"W x 21"D x 15"H. Vented doors have spring loaded hinges, padlock hasp, and knockout plug for cylinder locks. Top is constructed of 2-1/4" maple. Available with or without vises. Available in either gray or black base unit. Overall size: 64"W x 28"D x 33-1/4"H.
Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)
Designed to meet OSHA and NFPA standards, cabinets are constructed of sturdy 18-gauge (1-mm) thick double-wall, welded steel with 1-1/2” (38-mm) of insulating air space for fire resistance. High-performance, self-latching doors close easily and securely for maximum protection under fire conditions. Fail-safe closing mechanism ensures three-point stainless steel bullet latching system works every time.
Hold all your key drawing supplies in one place. This plywood and maple hardwood cabinet is built to hold T-squares, 18" x 24" drawing boards and other supplies for either 24 or 36 students. The 3-point locking handles protect the items from theft. An upper shelf provides a place to store extra materials such as paper and books. The eight totes provide space to put compass-as, triangles, and other drawing supplies. Can be ordered with or without tools. Overall size: 22"D x 84"H.
This series offers 1-3/4" maple tops and 4 bench lengths and 3 locker styles to choose from. The all-welded, 1-section construction has reinforced side panels (20-gauge). Locker doors (18-gallon) have air vents, spring hinges, padlock hasp & knockout plug for cylinder lock. Choose between vertical lockers, horizontal lockers or double door bases. Your choice of black or gray baked enamel finish. Counter tops need to be attached during assembly. 32-3/4"H.
Designed to meet OSHA and NFPA standards, cabinets are constructed of sturdy 18-gauge (1-mm) thick double-wall, welded steel with 1-1/2” (38-mm) of insulating air space for fire resistance. High-performance, self-latching doors close easily and securely for maximum protection under fire conditions. Fail-safe closing mechanism ensures three-point stainless steel bullet latching system works every time.
This series offers 1-3/4" maple tops and 4 bench lengths and 3 locker styles to choose from. The all-welded, 1-section construction has reinforced side panels (20-gauge). Locker doors (18-gallon) have air vents, spring hinges, padlock hasp & knockout plug for cylinder lock. Choose between vertical lockers, horizontal lockers or double door bases. Your choice of black or gray baked enamel finish. Counter tops need to be attached during assembly. 32-3/4"H.
Base consists of a single-faced heavy gauge steel unit, welded and riveted throughout. The unit provides six horizontal locker openings which measure 18"W x 21"D x 10"H. Vented doors have spring loaded hinges, padlock hasp, and knockout plug for cylinder locks. Top is constructed of 2-1/4" maple. Available with or without vises. Available in either gray or black base unit. Overall size: 64"W x 28"D x 33-1/4"H.
Base consists of a single-faced heavy gauge steel unit, welded and riveted throughout. The unit provides six horizontal locker openings which measure 18"W x 21"D x 10"H. Vented doors have spring loaded hinges, padlock hasp, and knockout plug for cylinder locks. Top is constructed of 2-1/4" maple. Available with or without vises. Available in either gray or black base unit. Overall size: 64"W x 28"D x 33-1/4"H.
Constructed of heavy Gauge steel members which can be combined in a number of ways using any one of 3 tops, lower shelf, back and end stops. A wide variety of sizes is possible. Legs are welded construction with floor feet and include a three quarter deep lower shelf and rear stringer. Color: gray. Choice of three tops include: 1) 12 gauge steel top wrapped over 2" thick core, 2) 1-3/4" Maple top, 3) 2-1/4" Maple top. Height varies with top selected.