Academy Furniture. Art/Music

TABLE, PLAIN, PHENLC TOP, 30X72

P7154K30LE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,531.00

NPS® Height Adjustable Science Lab Table with Book Compartments and Oak Caster Legs, 30" X 60", Phenolic Top

PSLT3060AH-OK-BC-C

Seat/Back/Top Color: Black
Frame/Leg Color: Oak

The NPS PSLT-AH Height Adjustable Science Lab Tables have "perfect chemistry" with any science classroom. These paragons of endurance are built with a choice of stylistic light oak woodgrain, or striking textured black legs beneath a phenolic resin tabletop with a matte finish. The work surface is crack-resistant and can be modified using carbide-tipped tools. It is impervious to extreme cold, heat up to 275° F as well as damage from virtually any chemical, acid or possibly corrosive substance that may be found in a laboratory setting. Robust legs are 2 3/8” diameter, and adjust smoothly in ¾” increments from 29”-41”. Legs automatically lock at your height setting to conveniently accommodate all seating requirements. Easily assemble the PSLT-AH thanks to pre-drilled pilot holes. Feet are outfitted with oversized glides, or optional casters. The PSLT-AH meets MAS Certified Green environmental industrial standards. Optional Book Compartment models come with two storage compartments concealable with the included side-panel aprons.

$1,532.90

NPS® Height Adjustable Science Lab Table with Book Compartments and Black Caster Legs, 30" X 60", Phenolic Top

PSLT3060AH-10-BC-C

Seat/Back/Top Color: Black
Frame/Leg Color: Black

The NPS PSLT-AH Height Adjustable Science Lab Tables have "perfect chemistry" with any science classroom. These paragons of endurance are built with a choice of stylistic light oak woodgrain, or striking textured black legs beneath a phenolic resin tabletop with a matte finish. The work surface is crack-resistant and can be modified using carbide-tipped tools. It is impervious to extreme cold, heat up to 275° F as well as damage from virtually any chemical, acid or possibly corrosive substance that may be found in a laboratory setting. Robust legs are 2 3/8” diameter, and adjust smoothly in ¾” increments from 29”-41”. Legs automatically lock at your height setting to conveniently accommodate all seating requirements. Easily assemble the PSLT-AH thanks to pre-drilled pilot holes. Feet are outfitted with oversized glides, or optional casters. The PSLT-AH meets MAS Certified Green environmental industrial standards. Optional Book Compartment models come with two storage compartments concealable with the included side-panel aprons.

$1,532.90

TABLE, PLAIN, 1 EPXY TOP, 21X72

P7236K30N

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,533.00

TABLE,COMP,CHEM TOP,42X48

C7112K30L

Book Compartment Tables are built with the same quality techniques as the plain apron table. They are finished with a chemical resistant, earth-friendly UV finish. These tables have either two or four book compartments (depending on size) installed in the apron. The book compartments measure 14" W x 13-5/8"D x 3-7/8"H. The table has a weight capacity of 500 lbs. On tables 72"W or over, we recommend ordering with leg braces and stretchers. (Shipped KD with tops attached)

$1,533.00

TABLE, PLAIN, PHENLC TOP, 36X54

P7194K34SE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,534.00

TRAPEZOID TABLE, 36H X 60W X 24D W/ CASTERS

TZ7601M36C

This unique shaped science table allows for flexibility. Use as a two student table or have two or more tables together for group work. The sturdy construction ensures that moving the table won't cause problems. The tables are made of solid oak or maple aprons, 2-1/4" solid legs and have a steel frame supporting the apron. The wood is finished with a chemical resistant, non-emitting UV Finish.

$1,534.00

TABLE, PLAIN, EPXY TOP, 24X54

P7206M30SE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,535.00

TABLE, PLAIN, PHENLC TOP, 36X54

P7194K36SE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,537.00

TABLE, PLAIN, PHENLC TOP, 36X60

P7224K30SC

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,537.00

NPS® Stage Pie Compatible with a 4'x8'x24" Stage, Grey Carpet

SP4824C-02

Product Video: Click to view video

Seat/Back/Top Color: Grey
Frame/Leg Color: Black

The NPS Portable Carpeted Stage Pie is used to create customized bow, oval or ring-shaped configurations. It's the reliable and affordable choice for your school performances and assemblies. Users are supported by a heavy-duty, 16-gauge steel, black powder-coated frame. The premium 3/4" thick plywood deck is durable and features a firmly-affixed carpeted surface. Legs are constructed with 14-gauge steel tubing and feature simple and safe spring-loaded locking mechanisms allowing for quick set-up assembly and folds up easily for manageable portable storage. The stage offers a secure weight capacity of over 200 lbs. per square foot. High-impact plastic glides will ensure floors are protected from damage. Firmly welded ganging devices let users combine equal-height stages to create a large single stage platform or assemble different sizes to create choral or band riser configurations. Ships fully assembled.

$1,537.41

NPS® Stage Pie Compatible with a 4'x8'x24" Stage, Blue Carpet

SP4824C-04

Product Video: Click to view video

Seat/Back/Top Color: Blue
Frame/Leg Color: Black

The NPS Portable Carpeted Stage Pie is used to create customized bow, oval or ring-shaped configurations. It's the reliable and affordable choice for your school performances and assemblies. Users are supported by a heavy-duty, 16-gauge steel, black powder-coated frame. The premium 3/4" thick plywood deck is durable and features a firmly-affixed carpeted surface. Legs are constructed with 14-gauge steel tubing and feature simple and safe spring-loaded locking mechanisms allowing for quick set-up assembly and folds up easily for manageable portable storage. The stage offers a secure weight capacity of over 200 lbs. per square foot. High-impact plastic glides will ensure floors are protected from damage. Firmly welded ganging devices let users combine equal-height stages to create a large single stage platform or assemble different sizes to create choral or band riser configurations. Ships fully assembled.

$1,537.41

NPS® Stage Pie Compatible with a 4'x8'x24" Stage, Black Carpet

SP4824C-10

Product Video: Click to view video

Seat/Back/Top Color: Black
Frame/Leg Color: Black

The NPS Portable Carpeted Stage Pie is used to create customized bow, oval or ring-shaped configurations. It's the reliable and affordable choice for your school performances and assemblies. Users are supported by a heavy-duty, 16-gauge steel, black powder-coated frame. The premium 3/4" thick plywood deck is durable and features a firmly-affixed carpeted surface. Legs are constructed with 14-gauge steel tubing and feature simple and safe spring-loaded locking mechanisms allowing for quick set-up assembly and folds up easily for manageable portable storage. The stage offers a secure weight capacity of over 200 lbs. per square foot. High-impact plastic glides will ensure floors are protected from damage. Firmly welded ganging devices let users combine equal-height stages to create a large single stage platform or assemble different sizes to create choral or band riser configurations. Ships fully assembled.

$1,537.41

NPS® Stage Pie Compatible with a 4'x8'x24" Stage, Red Carpet

SP4824C-40

Product Video: Click to view video

Seat/Back/Top Color: Red
Frame/Leg Color: Black

The NPS Portable Carpeted Stage Pie is used to create customized bow, oval or ring-shaped configurations. It's the reliable and affordable choice for your school performances and assemblies. Users are supported by a heavy-duty, 16-gauge steel, black powder-coated frame. The premium 3/4" thick plywood deck is durable and features a firmly-affixed carpeted surface. Legs are constructed with 14-gauge steel tubing and feature simple and safe spring-loaded locking mechanisms allowing for quick set-up assembly and folds up easily for manageable portable storage. The stage offers a secure weight capacity of over 200 lbs. per square foot. High-impact plastic glides will ensure floors are protected from damage. Firmly welded ganging devices let users combine equal-height stages to create a large single stage platform or assemble different sizes to create choral or band riser configurations. Ships fully assembled.

$1,537.41

TABLE, PLAIN, PHENLC TOP, 30X72

P7154K30S

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,539.00

TABLE, PLAIN, CHEM TOP 30X72

P7152M30SE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,539.00

Oklahoma Sound® Vision Floor Lectern With Sound, Digital Display and Rechargeable Battery

M612-S

Seat/Back/Top Color: Cherry

The Vision is truly a sight to see. This gorgeous, dynamic sound lectern has a 30-watt amp perfect for presenting to venues with an audience capacity of up to 900. It brandishes a built-in digital 15" LCD screen for projecting JPEG slideshows, MPEG film presentations or to centrally display an organization's logo or icon. The on-screen menu is available in seven language options. Its sleek cabinetry features scratch-resistant, cherry-colored wood laminate overa medium-density fiberboard (MDF) core with two sizeable 14.5" x 23" shelves for ample storage and four concealed easy-roll casters (two locking) for smooth mobility. The Vision comes complete with two detachable external speakers, user-friendly remote control, handheld mic with 9' cable, tie-clip/lapel mic with 10' cable, flexible gooseneck mic holder and AC power cord. Multimedia capabilities include simultaneous usage with two wired and one wireless (optional) microphones. It operates either by AC plug or with included battery model PS12-V and features input jacks for CD players, extension speakers, recording outputs and playing MP3s. Ships ready for easy assembly.

$1,539.40

TRAPEZOID TABLE, 30H X 60W X 24D

TZ7602M30N

This unique shaped science table allows for flexibility. Use as a two student table or have two or more tables together for group work. The sturdy construction ensures that moving the table won't cause problems. The tables are made of solid oak or maple aprons, 2-1/4" solid legs and have a steel frame supporting the apron. The wood is finished with a chemical resistant, non-emitting UV Finish.

$1,540.00

MOVE CABINET, DRAWER/RH DOOR

MV18-2424M-C

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

$1,540.00

MOVE CABINET, DRAWER/LH DOOR

MV19-2424M-C

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

$1,540.00

MOVE CABINET, DRAWER/LH DOOR

MV19-2424M-P

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

$1,541.00

MOVE CABINET, DRAWER/RH DOOR

MV18-2424M-P

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

$1,541.00

TABLE, PLAIN, 1 EPXY TOP, 24X60

P7606M30L

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,541.00

TABLE, PLAIN, Maple TOP, 24X72

P7305M34LE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,541.00

MOVE CABINET, DRAWER/LH DOOR

MV19-2424K-C

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

$1,542.00

MOVE CABINET, DRAWER/RH DOOR

MV18-2424K-C

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

$1,542.00

MOVE CABINET, DRAWER/RH DOOR

MV18-2424K-P

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

$1,543.00

MOVE CABINET, DRAWER/LH DOOR

MV19-2424K-P

Looking for casework that flexible? Consider our Move line of cabinets. Instead of being permanently set in a room, these cabinets can be reconfigured based on your needs. Each unit features one of three cabinet styles: door, drawer/door, or drawer cabinet. Each cabinet is hung from a black power- coated, 16-gauge steel support frame with nylon adjustable floor glides. The cabinets are constructed of solid hardwoods and veneers in either oak or maple and finished with a chemical resistant, earth friendly UV finish and include locks, black hinges and pulls. The back of the cabinet is designed to be against a wall and does not have a finished back or a toe kick. The cabinets are available with two top options: 1-1/4" ChemGuard or 3/4" phenolic.

$1,543.00

TABLE, PLAIN, PHENLC TOP, 36X60

P7224K30LE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,543.00

TABLE, PLAIN, 1 EPXY TOP, 24X60

P7606M34LE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,543.00

TABLE,PLANNING,COMP,ALMOND,LAM,26H

PT-61P26

Designed to be used in most any environment from art and general planning to sewing and model construction. The base is constructed of two tapered solid maple pedestal style panel legs and two solid maple truss bars. The unique way the top is attached prevents the table from racking or rocking. The table is finished with an earth-friendly UV finish. Choose from plain, book compartment or tote tray units. Book compartment measures: 34-1/2"W x 12-1/16"D x 2-1/4"H. Each tote measures: 13-1/2"W x 19"D x 3-1/2"H. Other choices include standard height (30"H) or elementary height (26"H), and the choice of 1-3/4" solid maple top or 1-1/4" plastic laminate with 3 mm PVC edging in either birch or almond color. Overall size: 60"W x 42"D.

$1,547.00

TABLE,PLANNING,COMP,BIRCH,LAM,26H

PT-61PNB26

Designed to be used in most any environment from art and general planning to sewing and model construction. The base is constructed of two tapered solid maple pedestal style panel legs and two solid maple truss bars. The unique way the top is attached prevents the table from racking or rocking. The table is finished with an earth-friendly UV finish. Choose from plain, book compartment or tote tray units. Book compartment measures: 34-1/2"W x 12-1/16"D x 2-1/4"H. Each tote measures: 13-1/2"W x 19"D x 3-1/2"H. Other choices include standard height (30"H) or elementary height (26"H), and the choice of 1-3/4" solid maple top or 1-1/4" plastic laminate with 3 mm PVC edging in either birch or almond color. Overall size: 60"W x 42"D.

$1,547.00

TABLE, PLAIN, PHENLC TOP, 36X60

P7224K30S

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,547.00

TRAPEZOID TABLE, 30H X 60W X 30D

TZ7142K30N

This unique shaped science table allows for flexibility. Use as a two student table or have two or more tables together for group work. The sturdy construction ensures that moving the table won't cause problems. The tables are made of solid oak or maple aprons, 2-1/4" solid legs and have a steel frame supporting the apron. The wood is finished with a chemical resistant, non-emitting UV Finish.

$1,549.00

TABLE,ADJUSTABLE,24X54,PLASTIC

P8201K

A perfect solution for ADA requirements that can adjust in 2 cm increments from 27-3/4" to 39" (42"H with 3" spacer provided). Can also be adjusted for use as an incline surface for physics. Solid 4-1/2" oak aprons are attached to your choice of three top options: plastic laminate, ChemGuard, and phenolic. Note: phenolic resin tops are heavier and may require two people to adjust the height. The wood is finished with a chemical resistant, earth-friendly UV finish. The table has a weight capacity of 500 lbs. Optional casters sold separately.

$1,550.00

TABLE, PLAIN, CHEM TOP, 42X60

P7902K30SE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,551.00

TABLE, PLAIN, PHENLC TOP, 30X72

P7154K34LE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,554.00

TABLE, PLAIN, PHENLC TOP, 30X60

P7144K36SC

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,555.00

TABLE, PLAIN, 1 EPXY TOP, 24X60

P7606M36LE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,555.00

TABLE,ADJUSTABLE,24X48,CHEM

P8102K

A perfect solution for ADA requirements that can adjust in 2 cm increments from 27-3/4" to 39" (42"H with 3" spacer provided). Can also be adjusted for use as an incline surface for physics. Solid 4-1/2" oak aprons are attached to your choice of three top options: plastic laminate, ChemGuard, and phenolic. Note: phenolic resin tops are heavier and may require two people to adjust the height. The wood is finished with a chemical resistant, earth-friendly UV finish. The table has a weight capacity of 500 lbs. Optional casters sold separately.

$1,555.00

TABLE, PLAIN, CHEM TOP, 42X72

P7402K30S

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,556.00

WALL MOUNTED TOOL STORAGE CABINET

MC-1

Made of three sections, with the middle section mounted to the wall and the hinged outside section can be closed and locked. The plywood cabinet is lined with a pegboard interior to allow flexible arrangements of tools. The unit comes with an assortment of hooks. When open, it provides 96"W of continuous tool mounting area. It has an earth-friendly UV finish. Center measures 48"W x 6"D x 48"H. Outside sections measure: 24"W x 6"D x 48"H. Overall size: 48"W x 12"D x 48"H.

$1,556.00

TABLE, PLAIN, PHENLC TOP, 42X54

P7804K30L

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,557.00

TABLE, PLAIN, PHENLC TOP, 30X72

P7154K34S

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,562.00

TABLE, PLAIN, PHENLC TOP, 30X72

P7154K36S

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,564.00

TABLE, PLAIN, 1 EPXY TOP, 21X72

P7236K34N

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,564.00

TABLE, PLAIN, PHENLC TOP, 36X60

P7224K34LE

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,567.00

TABLE, PLAIN, 1 EPXY TOP, 21X72

P7236K30L

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

$1,567.00